Leading 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Do not ignore the forklift at work. If the operation is bad, there will be significant accidents in mins, and there are lots of mishaps entailing forklifts.

Instance 1: The forklift freight blocked the motorist's sight, and the person in front could not be discovered, leading to a rolling crash.
Case 2: In order to preserve the equilibrium of the forklift when raising heavy goods, the workers utilized their body weight as the weight, which practically created casualties.
Case 3: The size of the forklift freight surpasses the allowable size of the route and holds on the roadside shelf, which nearly creates an accident.
Instance 4: Forklift is speeding up and surrender throughout a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift raises the employees illegally, the forklift motorist does not use the safety belt, the forklift lifter falls and the vehicle driver is squashed when the forklift surrender.
Instance 7: The forklift vehicle driver did not put on a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift operation ought to take notice of these issues ：.

Start.
1. Before beginning, observe the environments, and after validating that there are no barriers that prevent the safety and security of driving, honk the horn first and after that start.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale should be safe before beginning.
3. When the forklift begins with a tons, the driver needs to initially validate that the tons is secure and reputable.
4. The beginning needs to be slow-moving and stable.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the pole must be slanted in reverse. .
2. Do not raise the fork expensive when driving. When going into and leaving the work website or while driving, be careful that there will be no obstacles in the sky. When the tons is taking a trip, the fork has to not be raised too expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork must be decreased to the normal driving position before driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal needs to be released initially. High-speed sharp turns are restricted. High-speed sharp turns will certainly cause the lorry to lose lateral stability and topple. .
5. When the forklift is downhill, it is purely prohibited to switch off the flame and slide, and it is forbidden to brake suddenly while driving with lots unless there are unique situations.
6. When the forklift is running, it has to obey the web traffic rules in the factory and need to maintain a certain safety distance from the car in front. .
7. When the forklift is running, the tons needs to remain in the most affordable setting that does not impede the driving, and the gantry must be effectively slanted back. The lots will not be elevated other than when piling or packing. .
8. The height of the load should not block the chauffeur's sight. In unique conditions, when the thing influences the forward vision, drive at a reduced speed when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for employees to Stand-on Electric Pallet Stacker base on the fork to hold items and play a balancing duty. .
12. If issues are found, they will certainly be fixed and reported in a timely manner, and they will certainly never operate with ailments or hide them.

packing and unloading.
1. When fork-loading things, the distance between both forks ought to be adjusted as required to make the tons of both forks well balanced and not skewed, and one side of the thing ought to be against the rack. .
2. It is restricted to deal with a single fork or utilize a fork top or pull. In unique situations, safety indication must be established to remind bordering pedestrians. .
3. In the process of loading and dumping products, the forklift has to be braked with the brake. .
4. The rate of the car should be sluggish and steady. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it must be noted that the fork idea need to not touch other products or objects. The tons should be stabilized with very little back tilt of the gantry so that the tons does not glide backwards. The pole can be slanted forward somewhat when the lots is lowered to enable very easy placement of the tons and removal of the forks. .
6. It is restricted to fork goods at high speed and ram hard objects with the fork head. .
7. When the forklift is working, it is restricted Stand-on Electric Pallet Stacker for individuals to stand around the fork, so as to prevent the collapse of the goods and injure individuals. .
8. Overloading is restricted, and it is forbidden to make use of forks to lift personnel to participate in high-altitude procedures to stay clear of high-altitude dropping crashes. .
9. It is not allowed to use the brake inertia to slip, put, round or roll items. .
10. It is not enabled to make use of forks to select, transform pallet dump.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should discharge the goods or lower the fork framework.
2. Pull the emergency brake manage to dead or dispirit the emergency brake button.
3. The engine is shut off and the power is cut off. (Except for special scenarios, such as the motorist does not leave the automobile's line of vision and does not surpass 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look needs to be examined, and gas, lubing oil and cooling water ought to be added.
2. Examine the safety and security efficiency of starting, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. Throughout the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the external leak needs to likewise be inspected and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You need to inspect before leaving the car;.
2. When you run into a person in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the freight should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be also sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is more than 10%, the car should be driven backwards when going downhill;.
8. When the forklift workers carry the goods and progress, if they run into big or hefty goods and most likely to the driver's line of vision, they should take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork procedure is not allowed.
2. It is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844